Golf Wedges - Resources, Bargains and Buys Superblog

Sunday, March 23, 2008

The Best Clone Golf Clubs Updates

Featured Golf Article


Get this best selling golf eBook and Mp3 audio file to improve your skill level

Which Golf Clubs Are For You?

By: Lee MacRae

With such a large variety of golf clubs on the market today, it is no wonder that many newcomers to the game have a hard time when it comes to choosing new clubs.

We will go through a few basic tips to help you determine which golf clubs are right for you.

To begin with, it can be stated that "off the shelf" golf clubs will work for nearly everybody standing between 5 feet and six feet tall. That principle holds for both sexes. Shorter or taller golfers may need to look to the custom club for proper equipment.

Cast Iron or Forged Iron?

Cast iron is the normal route to take when buying new clubs.

And there is a reason for that. Very simply because standard cast iron clubs tend to have a larger "sweet spot". That term refers to the area in the middle of the face of the club head where the ball should be struck for maximum distance and accuracy. The larger the "sweet spot" on a club face, the more area you have to strike the ball well. It makes it a little easier to hit the "bulls eye" every time on your shots. Beginners especially benefit from that standard cast iron feature. Until their swing plane is more developed, they will have an easier time striking the ball on a consistant basis with the cast iron club. That is why you see a lot of oversized club heads on the market today. They allow average duffers the opportunity of striking the ball well and getting great drives more often.

With forged iron clubs you have the exact opposite. A smaller sweet spot that makes your drives that much harder to hit well.

So why are forged clubs even sold?

For a very simple reason. Cast iron is a softer metal that offers a better "feel" on a shot. The more experienced golfers can use this feel to great advantage, shaping their shots, even curving them intentionally when the circumstances require it. So, in effect, they trade off the larger sweet spot for the shot shaping feel of a forged iron club.

Next question, will you use steel or a composite material for the shaft of your new club?

The significant factor here is club head speed. A typical golfer will have a club velocity between 80-94 mph. A slower swing speed means you had better think of using a shaft made from composite material, not steel. The problem with lower speed is you get less distance on your shots. You need to generate more speed [and more power] or find some way to compensate until you can. And that is where the composite golf club shaft enters the picture. It gives you a lot more distance than you would get with your normal swing and a steel shaft.

By contrast, those with good distances on their shots, will fare much better by using a steel shaft that will give them some touch and control on their shots.

In order to determine your personal swing speed, look for a sports shop or golf store that has speed sensor equipment and get yourself clocked.

With just these few starting hints, it is generally best if you rent a few different sets of clubs as you play and take note of how each club assists or hinders your game. You are searching to determine your personal strong points and weak points. Try out the diverse types and sorts of clubs available to you and see what works best for your own game.

If you implement these tips and work on them, you will be certain to develop a better drive within a short period of time. Just keep on practicing and working on your improvement. It's only a matter of time before your scores begin to drop.

Improve your golf game with a great golf training aid today!

Thoughts On Golf

Handle Leads Hands
The body should continue to move the arms through impact and into the finish. Don't allow the clubhead to pass the handle of the club until well past impact.
...Golf Tips magazine

Eyes And Arms
On the putting green, the eyes and the forearms should be parallel to the target line at address. This will encourage the putter to track on the proper path without manipulation during the stroke. If the eyes and/or the forearms are misaligned, it's impossible to make a putt without compensating during the stroke. Notice how poor my alignment is at far left�this setup is common and bad.
...Golf Tips magazine

A Rehearsal Routine for Hitting Pinpoint Pitches and Chips
How you make a practice swing when chipping from off the green is especially critical. First of all, you're not just trying to calculate how far you need to hit the ball, you're also trying to determine how high the ball should fly and how much roll you want it to have. Also, a practice stroke helps you to assess the lie, which can range from having a ball that's sunken down in the rough to one sitting high on the collar. All these variables come into play when making a practice swing, which is why I think it's critical that every golfer learn a constant preshot technique.
...Golf Link

The follow-through is the result of the prior body movements. After impact it's just a matter of releasing all tension and letting centrifugal force finish your swing. Centrifugal force will keep the clubface travel and clubface angle in the proper position. After the ball leaves the clubface there is nothing you can do that will affect the flight of the ball.
...World Golf

More Golf News

Collegiate Players Make Titleist Overwhelming #1 Golf Ball

Thu, 08 Jun 2006 00:00:00 GMT
Titleist Also Tops Tee-to-Green Equipment Categories at Men's Championship.

New Episode of “Golf Fitness Academy Presented by Titleist” Focuses on Golf Fitness for Women

Mon, 22 Aug 2005 00:00:00 GMT

Better Than Ever

Mon, 22 Jan 2007 00:00:00 GMT
Titleist Ambassador Charley Hoffman Captures Bob Hope Chrysler Classic


Golf Club Information And More

Our Featured Golf Article


Get this best selling golf eBook and Mp3 audio file to improve your skill level

Cast Iron Golf Clubs Or Forged?

By: Lee MacRae

With a larger variety of golf clubs coming onto the scene every week, it can become more and more difficult to determine just exactly what you should be looking for when buying new clubs.

We will go through a few basic tips to help you determine which golf clubs are right for you.

How tall are you? Standard clubs are made for anyone between 5 to 6 feet tall and should work out fine. That can be said to apply to men as well as to women. Taller or shorter? Then custom clubs may now come in to the picture.

Will that be cast iron or forged?

For virtually all golfers, the stock cast iron golf clubs will be the soundest way to go.

Why, you ask? Because of the larger "sweet spot" you tend to find on the cast iron clubs. This is the are in the center of the club face where "forces" are said to be perfectly balanced to deliver the perfect shot. The larger the "sweet spot" on a club face, the more area you have to strike the ball well. It makes it a little easier to hit the "bulls eye" every time on your shots. You can see why beginners are usually told to stay with cast iron clubs Until their swing plane is more developed, they will have an easier time striking the ball on a consistant basis with the cast iron club. That is why you see a lot of oversized club heads on the market today. They allow average duffers the opportunity of striking the ball well and getting great drives more often.

With forged iron clubs you have the exact opposite. A smaller sweet spot that makes your drives that much harder to hit well.

So why are forged clubs even sold?

Because the "softer" forged metal gives the golfer a better feel than the harder cast iron does. The better players, on the other hand, will give up that larger sweet spot [and even some distance] to get that better feel of each and every shot they take. With a more consistant swing, they usually strike the ball dead center on most shots anyway. With the better feel of the forged iron club, they can draw, fade, hook or slice the ball deliberately when circumstances on the golf course require it.

The next thing to look at is the shaft itself. Will we get one made from steel? Or will it be a composite material?

The important touchstone here is golf club speed. An ordinary golf player will have a club velocity of 80-94 mph. Slower speeds normally means looking at a shaft made from composite material. The result of lower swing speed is less yardage on each shot. You want to find some way to offset your lower swing speed. And that is where the composite golf club shaft enters the picture. It gives you a lot more distance than you would get with your normal swing and a steel shaft.

By contrast, those with good distances on their shots, will fare much better by using a steel shaft that will give them some touch and control on their shots.

In order to determine your personal swing speed, look for a sports shop or golf store that has speed sensor equipment and get yourself clocked.

With merely these few starting points, it is usually best if you rent a few different sets of clubs as you play and take note of how each club aids or hinders your game. You are seeking to see your individual strong points or weaknesses. Try the various types and kinds of golf clubs available to you and, in time, you will be able to determine which clubs offer the best advantages for your game.

These simple golf driving tips have proved effective in helping many golfers around the world improve their drives off the tee. Simply apply what you have read here to your own circumstances. Here's to your own improvement!

Develop a great golf swing with an amazing golf training aid!

Additional Info On Golf Today

This is a very common problem for golfers � and it's an awkward adjustment. The solution is very simple, however. Instead of setting your driver behind the ball such that the center of the face is aligned with the ball, move backwards a couple of inches (towards your back) such that the toe of your driver is aligned with the ball. Now do the test again. Stretch out your arms and pick the club up to the ball's height. Is the ball aligned with the center of the driver face? If so, put the club back down and fire! If not, keep moving back until it is.
...PGA Tour

The grip most certainly will influence the clubhead, but any type of grip that will keep the wrists from opening or closing the blade is a good grip regardless of how the hands grip the club. Whatever grip is chosen the thumbs should be on top. The thumbs are the feelers and being on top one can feel if the blade is square. Any stroke that holes the ball consistently is a good putting stroke. Regardless of the style of the stroke the putter head should never be taken to the outside of the target line on the backswing.
...World Golf

You can�t fire a gun unless you pull the trigger, right? A similar concept also applies to the golf swing, which also usually requires a �trigger move� to get the body moving. Now, not everyone has a trigger, some manage to swing well from a static position to a dynamic position. But for the rest of us who often find confusion when it comes to where to start the golf swing, a trigger move can help you start swinging in a fluid and consistent manner.
...golf news

Keep Your Hands Low
Limiting the height of the followthrough will effectively reduce the height of your shots. The lower the hands, the lower the ballflight. Moving the ball back in your stance or choosing a stronger club and trying to swing easy are other ways to accomplish the same thing, but they're less reliable and more difficult to execute. Instead, keep your hands low in the finish (compare the two photos at right), and the trajectory of your shots will be lower.
...Golf Tips magazine

The Hands
The hands should completely reverse themselves from address to impact. Notice how the left wrist is flat while the right has moved from flat to bent back (Above right). This position is a must.
...Golf Tips magazine

Headline News About Golf

Tour Players Talk About the New 905R Driver

Thu, 02 Mar 2006 00:00:00 GMT
See what Titleist staff players Davis Love III, Adam Scott and Zach Johnson are saying about the New Pro Titanium 905R driver.

Titleist Tour Report - The Masters

Sat, 08 Apr 2006 00:00:00 GMT
Watch this week's Titleist Tour Report from the Masters.

Continuing a Tradition of Success

Fri, 30 Jun 2006 00:00:00 GMT
Titleist Pro Titanium 905 drivers are being played with overwhelming success by competitive players worldwide.

Ryder Cup watch

Thu, 06 Mar 2008 09:12:13 GMT
Iain Carter takes a look at England's Ian Poulter at the Johnnie Walker Classic


golf equipment
golf swing
golf swing aid
|